Leckey Mygo+ Mode D'emploi page 14

p14 Leckey Mygo+ User Manual
SECTION 7.6:
ATTACHING THE
SHOULDER SECTION
To attach the shoulder section to a
Size 1 Mygo+, remove the headrest
mounting bracket by removing the bolts
. Insert the shoulder section bracket
A
and supplied spacer plate between the
backrest and the headrest mounting
bracket. Bolt back together. Secure the
two metal tabs with additional screws
provided with the new spacer plate.
B
The screws are attached from the front.
Check it is securely fastened.
B
A A
B
SECTION 7.7:
ATTACHING THE
LATERAL SUPPORTS
While holding the components together,
remove the plastic knob and washer
Align the plastic angle adjuster mouldings
and lateral bracket with the slot in
the backrest and refit the washer and
plastic knob.
.
A
A