Leckey Mygo+ Mode D'emploi page 19

SECTION 7.16:
RETROFITTING THE
DYNAMIC BACKREST
To fit the dynamic backrest, insert the
strut into the bottom bracket as shown.
Use the provided screw, nut, saddle
washers and standard washers to secure
in place. Please ensure that the screw
thread protrudes through the nut.
Now raise the dynamic strut and insert
into the top bracket as shown.
Using the provided screw, nut and
washers, secure the new dynamic
backrest in place as shown.
Ensure that the bolt goes through
the centre of the assembly as shown.
Finally fit the domed cap.
A
A
B
C
D
C
B
Leckey Mygo+ User Manual p19
Use caution when Use caution when
assembling and fitting assembling and fitting
the dynamic backrest the dynamic backrest
as there is a minor risk as there is a minor risk
of finger nipping. of finger nipping.
D