Leckey Mygo+ Mode D'emploi page 28

p28 Leckey Mygo+ User Manual
SECTION 8.11:
CONTOURED
HEADREST CUSHION
To attach the headrest cushion, first place
the polypropylene reinforcement between
the cushion cover and the headrest
assembly. It should not be zipped inside
the cushion cover. Then place the cushion
onto the head support. Snap the central
fastener A and two side fasteners in
place. Bring the lower flap under the head
support and attach the velcro.
A
SECTION 8.12:
FLAT HEADREST
CUSHION
Place the cushion on to the head support.
Secure the central fastener
Bring the lower flap under the head
support and secure with the two
remaining fasteners
lateral covers are attached in the same
way as the lateral support padded covers.
B
For attaching headrest
please refer to Section 7.5
.
A
. The headrest
B
A
B