Leckey Mygo+ Mode D'emploi page 39

SECTION 9.17:
CONTOURED
HEAD SUPPORT
To adjust the height, depth and angle of
the contoured headrest, loosen the hand
knobs and when set to the desired
A
position retighten the knobs. Do not
remove the headrest while the user is
in the seat.
Never use the headrest to
force the position of the
user's head.
Always use caution to
ensure fingers do not
become trapped when
adjusting the headrest.
A
A
A
Leckey Mygo+ User Manual p39
SECTION 9.18:
FLAT HEADREST WITH
LATERAL SUPPORTS
To adjust the height, depth and angle of
the flat headrest, adjust using the hand
levers , as shown on the contoured
A
head support.
To adjust the width of the laterals loosen
plastic knob , slide to desired position
B
and tighten securely.
B
A
A
A
B