Replacement Parts Ordering - Modine MDB Série Manuel D'installation Et De Maintenance

rePlacement Parts orderinG

ordering
When servicing, repairing or replacing parts on these units, locate the serial plate of the unit and always give the complete model
number and serial number from the serial plate. The serial plate is located on the door of the electrical control box.
Figure 46.1 - serial Plate example
j MRB units are certified for use in the U.S. only and will be labeled with the ETL-US symbol only.
table 46.1 - serial number Format
serial number digit:
Order Number
Sequential Number On Order
01 = Single Unit Orders, etc.
Week of Manufacture:
Year of Manufacture
SPO Number
Profile Type
<blank> or F = Fixed
A = Adjustable
Profile Pressure Sensing
<blank> or 1 = Single Pickup Tube Assembly
2 = Dual Pickup Tube Assembly
46
j
1 2 3 4 5 6
9 9 9 9 9 9
Note: <blank> applies to units produced prior to Digit 18 being added to the Serial Number
Note: <blank> applies to units produced prior to Digit 19 being added to the Serial Number
7-500.10
7 8 9 10 11 12
0 1 0 1 0 1
13 14 15 16 17 18 19
1 2 3 4 5 F 1