Programming Level 0 : Control; Manual Operation - Chauvin Arnoux STATOP 4849 Notice De Fonctionnement

AHY1 Hysteresis of alarm
CF Celsius/Fahrenheit selection
rESo Resolution selection
N.B. : 2 & 3 may only be used for
" in " = 100
ConA Control action
ErPr Error protection
HYSt Hysteresis for ON-OFF control
LLit Low limit of range
HLit High limit of range
LCAL Low calibration parameter
HCAL High calibration parameter
3.5

Programming level 0 : control

The STATOP 4849 has several security levels (SEL function), to prohibit an unauthorised user access to
the fundamental control parameters.
User security resides in the necessity for the installer to keep the
seconds and at the most 16 seconds during display of the last parameter accessible at a given level to
access the higher level.
Programming level 0 concerns the directly accessible parameters and which are not the subject of
prohibited access.
3.5.1

Manual operation

Simultaneously pressing, for at least 6 seconds, the
buttons sets the instrument to manual mode : the output power is written (in %) in display (preceded by
the sign H (for HOT). It can be adjusted with the
To return to Automatic mode, press
During Automatic Mode, pressing the
output power in percent, without returning to Manual Mode.
3.5.2 Automatic operation
This is the normal mode of use of the controller.
When setting up for the first time, no parameter is accessible at level 0 of programming, because the
" SEL " parameter has a value 0. Only the setpoint value can be modified, by means of buttons
and on condition that the keyboard has not been locked (" LoCL " parameter, see § 3.7). Go directly to
stage 1 of the following chapter.
Subsequently, you may change the value of the " SEL " parameter so as to access, for this level of
programming (i.e. without protection), some parameters of level 1.
0...20% of span
0 : °F select
1 : °C select
0 : whole value
1 : 1 digit decimal
2 : 2 digit decimal
3 : 3 digit decimal
0 : direct (cooling) action
1 : reverse (heat) action
OUT
0: OFF
1: OFF
2: ON
3: ON
0...20% of span
See § 3.8.
See § 3.8.
and
or keys.
.
and buttons for more than 6 seconds displays the
31
0.5%
1
0
1
ALM
OFF
ON 1
OFF
ON
0.5%
-50°C
1000°C
0°C
800°C
button pressed for at least 6
fusion format
and ,