Scope Of Delivery; Technical Data - Mesto INOX SUPER EXTREME 3615S Mode D'emploi

GB IRL
Devices may not be used for spraying plant protection liquids.
Have damaged parts or parts that do not work properly repaired immedia-
tely by our customer service department or by service partners authorized
by us.
Avoid ignition sources in the environment if you spray combustible liquids.
Do not allow the device to remain under pressure and/or exposed directly
to sunlight. Make certain the device is not heated beyond the maximum
operating temperature (→ Table 1 below).
Never blow through the nozzles or valves with your mouth.
Use only spare and accessory parts from MESTO.
We cannot assume any liability resulting from the use of third-party parts.
Wear suitable protective equipment when working with hazardous substances.
When pumping, always observe the pressure gauge to ensure the maximum
spraying pressure is not exceeded (→ Table 1 below).
Before filling, after use and before maintenance work, allow the residual pres-
sure in the tank to dissipate completely (→ Section „After Use", Section 1).

Scope of delivery

Tank [1] with pump [2], shut-off valve [3], hose [4], instructions for use [5], spray wand [6]
(Fig. 1)
+
You will find the illustrations referred to in the text on pages 2 – 5 of these Instruc-
tions for Use, as well as on the insert.

Technical data

Device family
Type
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temp-erature
Weight when empty
Material of tank
Where device is carried
Technical residual quantity
Max. volume flow
Recoil force
Table 1
AUS USA
Stainless steel with polyethylene inner tank
on the back (optional accessories7121M)
13
NZ CDN
INOX SUPER EXTREME
3615S, 3615SE
10 l
13 l
6 bar
50 °C
5,7 kg
Manual
0,03 l
4,52 l/min
< 5 N
IND