Error Message - BH BLADEZ 200R Guide D'utilisation

CONSOLE OPERATIONS
OPERATION GUIDE:
1. Sleep Mode:
The computer will enter the sleep mode when there is no signal input and no keys are
pressed after 4 minutes. You can press any key to wake up the computer.
2. BMI (Body Mass Index): BMI is a measure of body fat based on height and weight that
applies to both adult men and women.
3. BMR (Basal Metabolic Rate): Your Basal Metabolic Rate (BMR) shows the number of
calories your body needs to operate. This doesn't account for any activity, it's simply the
energy needed to sustain a heartbeat, breathing and normal body temperature. It measures
the body at rest, not sleep, at room temperature.

ERROR MESSAGE:

E1 (ERROR 1):
Normal state: During workout, if the monitor does not get signal from the adjustment motor
more than 4 seconds and check under successive 3 times then the LCD will show E1.
Power on state: The adjustment motor will return to zero automatically, when the signal of
motor cannot be detected for more than 4 seconds then the adjustment motor's driver will
be cut off immediately and show the E1 on the LCD display. All the other digital and function
mark are blank, and the output signals are cut off also.
E2 (ERROR 2): When the monitor read the memory data, if the I.D. code is not correct or the
memory IC is damaged then the monitor will show E2 immediately at power up.
E3 (ERROR 3): Faulty Motor
Technical data of the current adapter: Available for Input: 110V/50Hz or 60Hz Output: 6V
DC/0.5~1A
Register your product warranty online at: www.BHFitnessUSA.com
TM
31
Questions regarding warranty and parts call: 636.634.2217