BH BLADEZ 200R Guide D'utilisation page 16

STEP 3
Use the Allen Wrench (66) to unscrew the 4 Screws (9) 4 Spring Washers 8mm (8) and 4 Arc
Washers (7) from the Handlebar Post (5). Set the screws and washers aside for assembly
later in this step.
Slide the Post Cover (10) onto the Handlebar Post (5) and connect the Mid Sensor Wire 1 (4)
at the bottom of the Handlebar Post (5) with the Mide Sensor Wire (12) coming out of the Main
Frame (13). Connect the Trunk Line 2 (3) to Trunk Line 1 (22).
Slide the Handlebar Post (5) onto the Main Frame (13) and secure with 4 Screws (9) 4 Spring
Washers (8) and 4 Arc Washers (7). Tighten with Allen Wrench (66).
#9 Screw 16mm #4
#9 Screw 16mm #4
#7 Arc Washer 8mm #4
#8 Spring Washer 8mm #4
#66 Allen Washer 6mm #4
Register your product warranty online at: www.BHFitnessUSA.com
16
Questions regarding warranty and parts call: 636.634.2217
ASSEMBLY INSTRUCTIONS
#4
TM