BH BLADEZ 200R Guide D'utilisation page 21

ASSEMBLY INSTRUCTIONS
STEP 8
Unscrew the 4 screws in the back of the Console (1) with Wrench (65) and set aside. Connect
the Console Wire (1a) with the Mid Sensor Wire 1 (4). Push the wires down into the Handlebar
Post (5) so they don't get pinched. Attach the Console (1) to the Handlebar Post (5) with 4
Screws (2). Use Wrench (65) to secure the screws. Then plug in the Trunk Line (3) into the hole
in the rear of the Console (1).
Move your machine by grasping the bar on the rear stabilizer and lifting until the wheels touch
the ground – then move the machine to you desired location. Level with 2 adjustable feet on
the bottom of the Rear Stabilizer.
Plug in the Adaptor (29) into a wall socket and then the socket in the front of the machine.
Start exercising!
#2 Screw 4PCS
#65 Wrench 13 - 14 -15mm
Register your product warranty online at: www.BHFitnessUSA.com
TM
21
Questions regarding warranty and parts call: 636.634.2217