Machine Specifications; Delivery Scope; Intended Use; Ce Declaration Of Conformity - Amann Girrbach ceramill map 200+ Mode D'emploi

M A C H I N E S P E C I F I C A T I O N S
4

Machine Specifications

E N 4.1

Delivery scope

_ Desktop scanner
▪ USB cable (2 ×)
▪ Mains cable
▪ Operating Instructions
▪ CD with installation software and calibration
data
▪ Calibration model
▪ Universal model holder
▪ Modelling wax
▷ After unpacking, check the machine for com-
pleteness and possible transport damages.
Please claim any transport damages immedi-
ately with your supplier.
4.2

Intended Use

The desktop scanner is a PC-controlled 3D scan-
ner for scanning dental tooth models.
NOTE:
The scan result depends on the materials being
scanned. Metal surfaces, for example, can lead
to artefacts. Scan spray can improve the scan
capability of materials.
For improper use of the system, the manufacturer
shall not assume any liability whatsoever.
Unauthorised modifications/alterations of the
machine shall also void the warranty.
22
4.3

CE Declaration of Conformity

This product was designed and manufactured
based on careful selection of the harmonised
standards to be observed, as well as additional
technical specifications. It thus corresponds with
the state-of-the-art and ensures maximum safety.
In terms of design and performance, this product
complies with the European Directives and the
supplementary national requirements. Conform-
ity has been confirmed with the CE marking.
The product's Declaration of Conformity can be
requested from the manufacturer.
EC Guidelines
2006/42/EC
(Machinery Directive)
2014/35/EC
(Low Voltage Direc-
tive)
2014/30/EC
(EMV directive)
Tab. 1
Applied harmonised
standards
DIN EN ISO 12100
DIN EN 61326-1
DIN EN 61010-1