The Vox Mode; Using Vox Mode Without The Headset; Using Vox Mode With The Headset - switel WT237 Mode D'emploi

Table des Matières

Les langues disponibles

4.9

The VOX mode

In VOX mode, the radio will automatically start to transmit as soon as your

voice or another noise is detected. It is not necessary to press the call

button.

The VOX mode can be used with the radios themselves or with the

headsets provided.

4.9.1

Switch on the radio while pressing the talk button

will appear in the display and the VOX mode will be activated.

Now speak into the radio normally. If the set sensitivity is achieved, the

radio will automatically start to transmit.

To switch off VOX mode, press the talk button

on the VOX mode again at any time by pressing the talk button very

briefly.

4.9.2

Switch off the radio. Open the connector cover on the left-hand side and

insert the headset plug into the socket provided for the purpose.

Now switch on the radio. The

the VOX mode will be activated.

NOTE: Do not connect the headset to the radio when it is switched on. In

this case, the radio will transmit continuously. Remove the headset and

then switch off the radio.

- Operation -

indicator will appear in the display and

VOX

. The

indicator

VOX

once. You can switch

Table des Matières

Table des Matières