Operating The Walkie−Talkies - switel WTF737 Mode D'emploi

An exception here is CTCSS/DCS code 0 (zero). When this setting is set, all
calls made on the channel set can be heard. In order to participate in the ra-
dio communication, you must set the corresponding CTCSS/DCS code.
Monitor function
The Monitor function enables the search for weak signals on the channel currently
set. If you receive an external signal, switch to a free channel. Always communicate
with other subscribers on a free channel to prevent interference.
a M and Y
M
1
VOX (handsfree)
With this function, the walkie−talkie begins to transmit automatically on detecting a
voice or a sound without the P button being pressed.
When you start to speak, there is a slight delay before the walkie−talkie starts
to transmit.
Activating VOX mode
4 x M
X
X/Y
P
There are three sensitivity levels available for operation in VOX mode which can be
selected according to the ambient noise.
1
Loud ambient
noise
1
VOX: Voice Operated Transmission = Activation on detecting a sound
Operating the Walkie−Talkies
Start monitoring (press both buttons
simultaneously)
End monitoring
Select VOX mode
Open the VOX settings
Select the sensitivity
Confirm the selection
2
Normal ambient
noise
3
Low ambient VOX deactivated
noise
OF
59