Putting the Walkie−Talkies into Operation
2 Putting the Walkie−Talkies into Operation
Safety information
Checking the package contents
The package contains:
− two walkie−talkies
− a power adapter plug
− two rechargeable battery packs
Inserting the battery pack
Open the battery compartment. Insert the battery pack supplied
in the battery compartment. Pay attention to correct polarity.
Close the battery compartment.
Charging the walkie−talkies
Connect the power adapter plug to the walkie−talkie headset/
charging socket. For safety reasons, only use the power adapter
plug supplied.
Attention: It is essential to read the Safety Information
in Chapter 1 before starting up.
Remove the belt clip beforehand, if necessary
. Page 74.
Before using the walkie−talkies for the first time, charge
them for at least 14 hours.
The walkie−talkies can neither send or receive during
the charging process.
− two headsets
− two belt clips
− an operating manual
73