Güde GWS 401 ECO Mode D'emploi page 20

Safe release of blocking
Unplug the machine from the mains.
Inspect and locate the point of blocking.
Remove blocking while considering all safety instructions.
Visually check the machine and make sure the machine is
not damaged. In particular, the saw blade must not be
damaged.
In case of doubts regarding removal of blocking or full
preparedness for operation, contact the technical services.
(see Service below).
Operator requirements
The operators must thoroughly read operation manual
before use.
Qualification
No special qualification is required for operation of the
machine except for a briefing conducted by a qualified
expert.
Minimum age
The machine may be used by person older than 18 years
only. An exception is use by younger person if the use
Training
Only appropriate briefing is required for use of the
machine. No special training is required.
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Visit our website www.guede.com and select Service to
help you quickly and without officialdom. Please help us to
help you. In order to identify your device in case of
complaint, please indicate serial number, product number
and year of manufacture. All information is available on the
product label.
To have it still available, please put it here.
Serial number:
Product number:
Year of manufacture:
Phone: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or
after the warranty period must be made in the original
packaging.
20