Record Setup - Lorex L200 Serie Manuel D'instructions

System Setup Controls

RECORD SETUP

The Record Setup controls the settings for
Recording for the DVR.
▲▼
Use the arrows to navigate through the
◄►
settings, and the arrows to change the
values. Press the MENU/EXIT button to return
to the previous menu.
RECORD SPEED SUBMENU
The Record Speed Submenu controls the
frames per second (fps) used for each
channel.
(L208/L218 Series menu shown)
The total available Frame Rate is 60 fps.
These frames are shared across all channels,
and can be divided according to channel
importance.
For example, a camera pointed at the front
door may require a higher frame rate (i.e. 15
fps) than a camera that is monitoring a low
traffic area (i.e. 7 fps).
24
RECORD QUALITY
Set the RECORD QUALITY to LOW, NORMAL or
HIGH. This setting is the same for all channels.
•
With a higher Recording Quality, the image
will appear clearer during playback;
however more storage space will be
required on the Hard Drive to save the
video.
•
With a lower the Recording Quality, the
image will appear less clear during
playback; however less space storage
space will be required on the Hard Drive to
save the video.
EVENT REC DURATION
Set the Recording Duration when an EVENT (sensor
/ motion) is detected on the system.
duration to 5, 10, 15, 20, 25 or 30 seconds.
RECORD SCHEDULE SUBMENU
The Recording Schedule is based on a 24-hour
clock, and each hour can be set for a different
recording type.
Set the