Firmware Upgrade - Lorex L200 Serie Manuel D'instructions

FIRMWARE UPGRADE

FIRMWARE UPGRADE
The system supports upgrading the Firmware
through a USB flash drive.
1. Download the new firmware from
www.lorexcctv.com
2. Copy the firmware files to a USB
flash drive.
3. Insert the USB flash drive into a USB
Port on the DVR.
4. Navigate through the System Menu:
SETUP Menu => SYSTEM Menu =>
F/W UPGRADE.
NOTE: If the USB flash drive is not detected by
the system, a failure message will appear:
If the USB flash drive is detected with valid
Firmware files, the following screen will
appear displaying the Current Firmware
Version and the New Firmware Version:
Press the PLAY Button to update the firmware,
or press the STOP Button to cancel.
40
to the PC.
NOTE: If the system is actively recording, the
Firmware Upgrade cannot take place. If
recording is in progress, press the STOP button
to end the recording before proceeding with
the firmware upgrade.
The message FIRMWARE UPLOADING... will
appear during the upgrade process. Once the
upgrade is completed, the system will reboot.
After the system has rebooted, the initial
loading screen displays the new firmware
version.
NOTE: Once the system has started the
Firmware Upgrade, DO NOT remove the USB
flash drive until after the system has rebooted
and reloaded to the Live Monitoring screen.
To confirm that the Firmware has been
upgraded successfully, check the new version
on the loading screen.
8CH STANDALONE DVR LOREX
(FW:2.50.85 UCODE:86)
VIDEO: NTSC
DISK0: 78533MB HD7280PLAT20
NEW DISK