Lorex L200 Serie Manuel D'instructions page 34

System Setup Controls
NETWORK SUBMENU
The information in the Network submenu
allows users to remotely access the DVR.
ENABLE – Set Enable to YES to remotely
connect to the DVR over a network connection.
If this option is set to NO, remote access to the
system will be disabled.
LOCAL IP MENU – The Local IP menu contains
the IP Address and other networking
information.
•
IP TYPE – The IP Type determines how
the Network Information is entered
into the DVR. There are three network
connection types:
DHCP – The network
o
automatically leases the
information to the DVR
Static – Enter the information
o
manually based on the
connected network
30
DHCP SETUP
NOTE: The Local Network will lease the
information to the DVR. The user is not
required to complete these fields.
•
IP Type: DHCP
•
The information for the IP Address,
Gateway and Net Mask will be
automatically provided by the Local
Area Network.
STATIC SETUP
NOTE: Gather the Network Information from
the Network Router prior to changing these
settings.
•
IP Type: Static
•
IP Address: Enter an IP address that is
not currently in use on the local
network.
•
Gateway: Enter the Gateway for the
local network.
•
Net Mask: Enter the Subnet Mask
information for the local network.