Storing The Machine - Stihl RE 143 Notice D'emploi

Masquer les pouces Voir aussi pour RE 143:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 63
English
After use
Rinse the connection latches of the
N
spray lance and nozzle with water
so that no deposits form
Roll the high-pressure hose and
N
power cable up on the holders
provided for this purpose – see
"Main Parts"
Versions with flat hose cassette
Empty remaining water from the flat
N
hose
Lay out the flat hose so that it is
N
straight and free from kinks or loops
*
Depending on the country, the flat
hose cassette is included or is
available as a special accessory
48
2
1
Insert the coupling in the mount and
N
guide the flat hose (1) through the
opening
Close the lock (2)
N
*
Roll up the flat hose
N

Storing the Machine

Store the machine in a dry room where it
is protected from frost.
If protection from frost cannot be
guaranteed, draw glycol-based
antifreeze – like that used in motor
vehicles – into the pump:
Insert water intake hose in container
N
with antifreeze
Insert spray gun without spray lance
N
in the same container
Switch on the machine with the
N
spray gun open
Actuate the spray gun until a
N
uniform jet emerges
Keep leftover antifreeze in a sealed
N
container
RE 143, RE 143 PLUS, RE 163, RE 163 PLUS

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Re 163

Table des Matières