Stihl RE 143 Notice D'emploi page 40

English
Connector on water inlet
2
1
Attach the connector (1) to the
N
water inlet (2) and tighten it by hand
Holder for flat hose cassette
Depending on the country, the flat hose
cassette is included or is available as a
special accessory.
The holders for the flat hose cassette
are included in all versions and can be
installed as needed.
Installing the holder for versions with
included flat hose cassette
3
2
1
Fasten the holder for the flat hose
N
cassette (1) to the holder on the
spray gun (3) with the included
screws (2)
38
4
6
5
Remove screw (4)
N
Fasten the catch hook for the flat
N
hose cassette (5) with the included
screw (6)
Installing the holder for versions without
included flat hose cassette
2
1
Remove the screws (1) from the
N
spray gun holder
Remove screw (2)
N
4
3
Fasten the holder for the flat hose
N
cassette with the included
screws (3)
Fasten the catch hook for the flat
N
hose cassette with the included
screw (4)
RE 143, RE 163
1
2
Position the holder (1) for the high-
N
pressure hose on the bottom of the
handle and fasten it with the
screws (2)
RE 143, RE 143 PLUS, RE 163, RE 163 PLUS