Husqvarna TE 310 2010 Guide D'utilisation Et D'entretien page 164

ELECTRICAL COMPONENTS LOCATION (TE-SMR)
The ignition system includes the following elements:
- Generator (1), in oil bath, on the inner side of L.H.
crankcase cover;
- Electronic ignition coil (2) under the fuel tank;
- Electronic power unit C.D.I. (3) under the fuel tank;
- Voltage regulator (4) under the fuel tank;
- Spark plug (5) on the R.H. side of cylinder head;
- Starting motor 12V-450W (6) behind the cylinder;
- Electric start remote control switch (8) on the left side of the
rear frame.
- M.A.Q.S. sensor (pressure, throttle control position, air tem-
perature) (10) on the throttle body.
1
70
The electric system includes the following elements:
- Battery 12V-6Ah (7) under the saddle;
- Flashing indicator device (17) on the left side of the rear
frame;
7
17
5
6
- Relay (14) for light and injection system, on the L.H. side of
the frame;
- Relay (14) for the electric fan, on the R.H. side of the frame;
- Electric fan (16);
8
14
4
2
14
14
16
3