Husqvarna TE 310 2010 Guide D'utilisation Et D'entretien page 120

HOT START (TC-TXC)
If it is a problem to start the engine when hot, or following a
fall, proceed as follows:
1) the transmission (1) should be placed in neutral;
2) pull the RED knob of the starter (2);
TC
1
2
26
3) pull the clutch lever (3);
4) push the kick-starter pedal (4) to start the vehicle.
TXC
TC
5) Then release the clutch lever (3).
BEFORE MOVING OFF, DEACTIVATE THE RED
KNOB (2) OF THE STARTER ON THE CARBURET-
TOR.
4