Husqvarna TE 310 2010 Guide D'utilisation Et D'entretien page 117

ENGINE START (TC-TXC)
Proceed as follows:
1) make sure the fuel tap (A) is in the Open position;
2) shift gear pedal (1) in neutral position.
A
TC
1
3) pull the starter knob (BLACK knob 2 for cold starting*,
RED knob 3 for warm starting)
*: after a prolonged inactivity of the motorcycle or in presence
of a low external temperature.
2
TXC
3
4) lower the starter pedal (4) until a certain resistance is no-
ticed (piston at T.D.C.);
4
TC-TXC
23