Electrical Connection - Wilo IF-Module Stratos Ext. Off OEM Notice De Montage Et De Mise En Service

English

7.2 Electrical connection

WARNING! Danger of electric shock!
Electrical connection must be carried out by an electrician authorised by the
local electricity supply company and in accordance with the applicable local
regulations [e.g. VDE regulations].
• Carry out installation as described in the previous section
• Carry out electrical installation of the pump as specified in the relevant installa-
tion and operating instructions
• Check the technical specifications of the electric circuits being connected to
ensure they are compatible with the electrical specifications of the IF-Module.
Terminal numbering as shown in Fig. 2, Pos. (3) from bottom to top
7.2.1 IF-Module Stratos Ext. Off
Terminal No. Terminal
1
2
3
4
5
6
• Check that the Ext. Off wires are free of interference voltage
• Connect the Ext. Off wires to external devices
• Connect the 0-10 V wires (make sure polarity is correct)
26
Ext. Off
Ext. Off
0-10 V
GND (for 0-10 V)
-
-
WILO SE 10/2013