Sygonix SY-3764730 Mode D'emploi page 31

• With the device turned off, insert a microSD card (class 10,
max. 128 GB) into the slot (10) until it clicks into place.
• Briefly press the K1 button (2). The red and blue LEDs on the
button will light up briefly. The red LED will go off and the blue
LED will glow steadily. The camera is in standby mode.
• Briefly press the K1 button. The blue LED will flash 3 times and
go off thereafter. The video recording will start. Videos will be
recorded for a time period of max. 10 minutes.
• To stop video recording, briefly press the K1 button. The blue
LED glows steadily. The video is automatically saved. The
camera is in standby mode.
• In standby mode, briefly press the K1 button twice in
succession. The red LED will flash once. Then the blue LED
will flash twice and go off. The camera is in motion detection
mode.
• As soon as any movement is detected, video recording will
start. The video will be recorded for approx. 5 minutes and
then saved.
• To stop motion detection, briefly press the K1 button twice. The
blue LED glows steadily. The camera returns to standby mode.
• Once the memory card is full, the first recording is overwritten.
• To turn off the camera, press and hold down the K1 button for
approx. 3 seconds. The blue LED on the K1 button will go off.
• Remove the microSD card from the slot to view or edit the
video recordings on your computer using the supplied card
reader (8). Briefly press the microSD card so that it is released
and can be removed.
31