Sygonix SY-3764730 Mode D'emploi page 29

It is recommended to use a USB charger with a 5 V/DC
output and 1 A charging current.
The internal rechargeable battery of the power bank
can be charged while a mobile device is being charged.
• Connect the Micro USB plug of the USB cable (7) to the
Micro USB port (11).
• Connect the USB-A plug to a free USB port on a USB charger
(not included). The red LED battery level indicator (1) will light
up.
• Four LEDs are used to indicate the battery level. The remaining
capacity of the battery is indicated by the lit LEDs as follows:
1 LED: Remaining capacity up to 25%
2 LEDs: Remaining capacity up to 50%
3 LEDs: Remaining capacity up to 75 %
4 LEDs: Remaining capacity up to 100 %
A steadily lit LED indicates the full battery level in the respective
area. A flashing LED indicates the current charging area.
• As soon as 4 LEDs glow steadily, the charging process is
completed. The charging time of the internal rechargeable
battery can be 7 – 8 hours at a battery level of approx. 25%.
• When charging is complete, disconnect the USB cable.
29