Sygonix SY-3764730 Mode D'emploi page 25

• Never use the product immediately after it has been
brought from a cold room into a warm one. The
condensation generated could destroy the product.
Allow the product to reach room temperature
before connecting it and putting it to use. This may
take several hours.
• Never leave the product unattended during use.
• The housing warms up during use. Ensure that there
is sufficient ventilation. Do not cover the housing!
• Do not store the product in a heated vehicle.
Avoid excessive heat (max. 40 °C). Observe the
information in the "Technical data" section.
• Make sure that the cable is not pinched, kinked or
damaged by sharp edges.
• Contact an expert when in doubt about the
operation, safety or connection of the product.
• Maintenance, modifications and repairs must be
carried out by a technician or a specialist repair
centre.
• If you have any questions that are not answered
in these operating instructions, please contact our
technical customer service or other professionals.
25