Installing The Appliance - Royal Catering RCEF 08E-EGO Manuel D'utilisation

The device is composed of:
1. An ON/OFF switch,
2. A thermostat to regulate the temperature at the level wished,
3. A control light (orange for the heating),
4. A heating element in the lower part of the device, which is controlled by the
thermostat.
FUNCTIONING
The temperature measurement in the tank is made at regular intervals. This informa-
tion is transmitted to the thermostat as a current value, and gets compared to the
value set by the user.
• If the current value is inferior to the set value, the thermostat makes the device
heat.
• If the current value is superior or equal to the set value, the thermostat stops
the heating.
20
CONSIGNING THE APPLIANCE
Checking packaging upon consignment
When the goods are received proceed with opening the packaging if there are no
signs of damage. if when the goods are delivered there are signs of damage to the
packaging, such as agent or courier, and within three days from the date indicated on
the documents draw up a detailed list and report of all damage to the goods. Do not
turn the packed goods upside down! When transporting the package make sure its
four main points are firmly secured (maintain the goods parallel to the ground).
Disposing of packaging
The various items used for packaging (cardboard, plastic straps, polyurethane foam)
should be conserved, so that the device can be sent back to the service center in best
conditions in case of problem!

INSTALLING THE APPLIANCE

Appliance location
The work surface where the device will be located must be suitable for the size of
the appliance, please refer to the measurements. The work surface must be leveled
and dry and at a fitting height from the ground to enable a proper use of the device.
!
The power cord connected with the appliance must be reliable grounding
an correspond to the technical details.
Grounding the device
A grounding plug is mounted on the backside of the device, with which you can earth
the fryer. To do so, please use a copper cable of min. 2mm².
Basket assembly
Please check you mounted the basket and its handle right, so that the basket remains
stable while working.
Rev. 02.01.2019 Rev. 02.01.2019 21