Log Placement - Napoleon Oakville Série Manuel D'installation

fi nishing
EN
3.3

log placement

WARNING
!
• Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
• The logs are fragile and should be handled with care.
PHAZER™ log and glowing embers, exclusive to Wolf Steel Ltd., provide a unique and realistic glowing effect
"PHAZER™ logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic
that is different in every installation. Take the time to carefully position the glowing embers for a maximum glowing
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
effect. Log colours may vary. During the initial use of the appliance, the colours will become more uniform as
maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become
colour pigments burn in during the heat-activated curing process.
Log Number
1
2
3
4
5
6
7
8
14
W415-4001 / 08.11.21
If applicable, insert the following statement:
note:
Log numbers are located on the bottom or back of the logs.
Part Number
W135-0778
W135-0779
W135-0780
W135-0782
W135-0781
W135-0783
W135-0784
W135-0785
Description
Rear log
Right log
Left log
Left crossover log
Right crossover log
Left charcoal log
Center charcoal log
Right charcoal