Door Closing And Opening; Log Placement - Napoleon GDS28N Instructions D'installation Et D'opération

5.2

door closing and opening

THE DOOR LATCHES ARE PART OF A SAFETY SYSTEM AND MUST BE PROPERLY ENGAGED. DO
BEFORE DOOR IS REMOVED TURN THE APPLIANCE OFF AND WAIT UNTIL APPLIANCE IS COOL TO
THE TOUCH. DOORS ARE HEAVY AND FRAGILE SO HANDLE WITH CARE.
When installing the fire viewing door, a simple procedure must be followed in order to not damage the door.
Open both side doors, exposing the bushings on the left and the latches on the right.
A.
Align the pins on the door to the bushings. Lower into place until both bushings touch.
B.
Engage the latch hooks into the door frame. Snap the rear handle hook to lock the latch closed.
C.
NOTE: It may be necessary to lift the door when securing it to ensure that it is in a horizontal position.
To open the door, repeat in reverse order.
HINGE PIN
BUSHING
5.3

log placement

FAILURE TO POSITION THE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TO USE
ONLY LOGS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTY
LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THE
PROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
NOT OPERATE THE APPLIANCE WITH LATCHES DISENGAGED.
CATCH SLOT
DAMAGE OR PERSONAL INJURY.
IGNITION MAY OCCUR.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
WARNING
!
DOOR
LATCH
WARNING
!
29
75.3
76.1A
W415-1426 / C / 07.31.18
EN