Log Placement - Napoleon GL22N Instructions D'installation Et D'opération

4 .4 LOG PL ACEM EN T
FAILURE TO POSITION THE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TO USE
ONLY LOGS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTY
LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THE
PROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
Phazer TM logs, exclusive to Napoleon Appliances, they provide a unique and realistic glowing effect that is
different in every installation. Failure to follow these log placement instructions may increase sooting.
Log colours may vary. During the initial use of the appliance, the colours will become more uniform as colour
pigments burn in during the heat activated curing process.
Positioning the logs improperly will increase fl ame impingement and carboning.
Blocked burner ports can cause an incorrect fl ame pattern, carbon deposits and delayed ignition. Use only
certifi ed Phazer logs available from your authorized dealer/distributor.
TM
THE SUPPLIED LOG SETS ARE REVERSIBLE!
This feature allows you the option of displaying two different log styles in one log set.
4 .4 .1 GL2 2
Place the rear log (#1) onto the 2
pins ensure the log is pushed fl ush
against the burner support, to the
rear of the unit, as shown.
#4
Place log (#4) onto the left side pin
as shown.
!
DAMAGE OR PERSONAL INJURY.
IGNITION MAY OCCUR.
#1
#2
Place log (#2) onto the grate on the
left side as shown.
Place log (#5) onto the right side
pin as shown.
76.1A
Place log (#3) onto the grate on the
right side as shown. Place the pins
into log (#1) as shown.
#5
Place log (#6) onto log (#1) and
allow it to rest on log (#2).
11
EN
PIN
PINS
#3
PIN
#6
W415-1101 / B / 07.29.13