Dimensions; Minimum Clearance To Combustibles - Napoleon Oakville Série Manuel D'installation

general information
EN
1.4

dimensions

SAFETY BARRIER
1.5

minimum clearance to combustibles

This appliance must be recessed into a vented non-combustible wood-burning appliance (prefabricated or masonry)
only. The minimum appliance opening size in which the appliance is to be installed is:
HEIGHT 21" (53.3cm)
The minimum allowable chimney fl ue size is 6" (152mm) round.
*Add 4" (102mm) for optional blower.
The minimum distance from the bottom of a combustible mantel projecting 3" (76mm) maximum from the wall to
the top of the appliance is 12" (30.4cm) (see "minimum mantel clearances" section).
note:
A non-combustible hearth must protrude a minimum of 12" (30.5cm) from the appliance.
A combustible hearth may be used if the appliance is raised 4" (102mm) above the hearth or if a Wolf Steel
raiser box is installed.
8
W415-4001 / 08.11.21
front view
top view
WIDTH 29" (73.7cm)
right side view
DEPTH * 14 3/8" (36.6cm)
back view