Safety Notes; General Safety Notes - Leica DM3 XL Mode D'emploi

3. Safety Notes

3. safety notes

3.1 General Safety Notes

These devices of protection class 1 are built and
inspected in accordance with EN 61010-1 / IEC
61010-1 Safety requirements for electrical equip-
ment for measurement, control and laboratory
use.
They also meet the requirements in EN 61326-1
/ IEC 61326-1 Electrical equipment for measure-
ment, control and laboratory use – EMC require-
ments.
It also complies with EN 62471 / IEC 62471, Photo-
biological safety of lamps and lamp systems, and
belongs to the exempt level (no photobiological
risk).
Caution!
In order to maintain this condition and to en-
sure safe operation, the user must follow the
instructions and warnings contained in this
operating manual.
8
Caution!
The instruments and accessories described
in this manual have been safety-tested and
checked for possible hazards.
Before modifying the instrument in any way
or combining it with non-Leica products not
dealt with in this manual, it is essential to
consult the Leica agency for your area or the
main factory in Wetzlar!
Any unauthorized interference with the in-
strument or use of the instrument for appli-
cations for which it is not designed will au-
tomatically cancel any warranty claim and
product liability!