Adjusting The Volume; Changing The Program; Using Udirect 3 With Umic - Unitron uDirect 3 Guide Rapide

uDirect 3 is capable of streaming up to 20 hours
with a fully charged battery.

Adjusting the volume

Press the uDirect 3 volume (
adjust:
Press ( ) to increase the volume
•
Press ( ) to decrease the volume
•
Adjusting the volume on the uDirect 3 will have
the same effect as adjusting the volume of the
hearing aids and may also amplify surrounding
sounds.

Changing the program

Changing hearing aid programs is only possible
if no streaming is in progress.
Press the access ( ) button to change hearing
aid programs.
Press the home ( ) button to return to the
startup program and volume level of your
hearing aids.
40
) buttons to

Using uDirect 3 with uMic

If you have a uMic, it works with uDirect 3 to
stream audio from a person or device to your
hearing aids.
hearing aid wearer
up to 20 meters
(65 ft)
uDirect 3
Pairing uMic to uDirect 3
1. Starting with the uMic in the off position,
press and hold the volume up ( ) button
and turn the uMic on. Continue to hold the
volume up ( ) button until the blue audio
indicator starts to flash.
2. Switch on uDirect 3 first. Press the connect
( ) and volume up ( ) buttons at the same
time for two seconds.
3. After successful pairing, the blue audio indicator
on the uDirect 3 and uMic will stop blinking.
speaker
uMic
41