Unitron uDirect 3 Guide Rapide page 19

Accepting incoming calls
To accept an incoming call, briefly press the
access ( ) button on your uDirect 3 once you
hear the ringtone through your hearing aids.
It will take about five seconds before you hear
the ringtone through your hearing aids.
Speak into the uDirect 3, not into the phone,
when the call is in progress.
For your safety, the hearing aid microphones will
remain on at reduced levels during phone calls
and audio streaming.
Only one phone call at a time is possible. A
second ringing phone is ignored while another
call is already connected. You must disconnect
the first call before answering the second one.
30
"click"
Ending a call
To end a phone call via your uDirect 3, briefly
press the access ( ) button. The call will
terminate and your hearing aids will return to
the previously-active program or audio source
(such as the audio jack input).
You can also end a call by operating your
phone instead of your uDirect 3.
Different ringtones of the uDirect 3
The phone ringtone depends on the uDirect 3
configuration and your phone capabilities.
The ringtone is assigned automatically during
the initial phone pairing process and cannot
be configured.
When pairing more than one phone, the second
and third paired phone will have a different
ringtone. A total of three different ringtones
are automatically assigned.
31