Wearing The Udirect 3 Correctly - Unitron uDirect 3 Guide Rapide

Audio indicator
The neckloop must be plugged in for any
streaming.
Plug or FM streaming Solid orange
Bluetooth phone Solid blue
or music streaming
One Bluetooth Short blink blue
device connected
Two Bluetooth Double-blink blue
devices connected
Bluetooth pairing Very fast blue blinking
Demo sound playing Solid pink
The Bluetooth pairing indication will be visible
even if the neckloop is not plugged in.
During cable or FM streaming, the audio
indicator will remain orange regardless of the
Bluetooth connection state.
12

Wearing the uDirect 3 correctly

Before any phone, music or TV streaming can
take place, the uDirect 3 must be switched on
and worn correctly as shown below:
1. Put the neckloop
around your neck (easily
done by unplugging one
neckloop plug).
2. Make sure both plugs
are well connected in
the neckloop sockets.
3. Switch the uDirect 3 on.
For streaming, the neckloop must always be
plugged in. When unplugged, the uDirect 3 will
go into sleep mode after two minutes. The power
and audio indicators will stop blinking and all
active Bluetooth connections are terminated
to save power. Plug the neckloop in again to
activate the streaming.
13