Using Udirect 3 With An Audio Device With A Headphone Jack; Setting Up The Fm Receiver - Unitron uDirect 3 Guide Rapide

Using uDirect 3 with an audio device
with a headphone jack
To benefit from the streamer and remote
control functions, we recommend wearing
the uDirect 3 around the neck.
Streaming music via a cable
The uDirect 3 must be switched on and
worn correctly around your neck.
1. Insert the audio
cable into the
headphones socket
on your audio player
and start the player.
2. Insert the other end
of the audio cable
into the audio input
on your uDirect 3. The audio streaming
is automatically activated.
Briefly press the access ( ) button to stop
and restart streaming.
46

Setting up the FM receiver

uDirect 3 can be used together with FM
equipment.
1. Place the FM transmitter near
the sound source and turn it on.
2. Turn the FM receiver on if
required.
3. uDirect 3 must be switched
on and worn correctly.
4. Attach your FM receiver to
the uDirect 3 via the FM input
as shown in the picture.
When FM is detected, you will hear
the FM notification tone for streaming
through your hearing aids. The FM notification
tone is similar to a phone ringtone.
Options for handling the FM signal during the
FM notification tone:
Accept: Briefly press the access ( ) button.
•
Put on hold: Press the access ( ) button
•
for two seconds.
47