Step 3: Adjusting The Volume Of The Tv Signal - Unitron uTV 3 Guide D'utilisation

It may take up to ten seconds until the
streaming resumes. Both streaming light
indicators, should be solid blue during
streaming.
If the uTV 3 status light:
• blinks green, make sure the audio input to
the uTV 3 is properly connected.
• is green, make sure the streamer is switched
on, both ends of the neckloop are plugged in
(for uDirect 3 or uDirect 2) and the devices are
paired.
• blinks blue, you are in pause mode. Press
the streamer access ( ) button to resume
streaming.
20
Step 3: Adjusting the volume of the
TV signal
First, set the volume of the TV speakers at the
level to suit other viewers.
Next, adjust the volume via the uTV 3 volume
control until the sound through the hearing aids
is comfortable.
To fine-tune the overall volume of the hearing
aids and uTV 3, you may use the streamer's
volume ( ) buttons.
21