Operating Distance; Button Lock Function - Unitron uDirect 3 Guide Rapide

Operating distance

If uDirect 3 is used as a handheld
remote control (without neckloop):
Maximum distance 110 cm/43''
•
Hold uDirect 3 as shown
•

Button lock function

The access ( ) button on your uDirect 3 can
be locked to avoid inadvertent presses. To lock
the button, press and hold the connect (
and Home ( ) buttons simultaneously. The
power indicator light will flash red three times
to indicate that the buttons have been locked.
Press and hold the connect (
( ) buttons simultaneously again to unlock
the buttons.
You will still be able to answer an incoming
telephone call using the access ( ) button
while it is locked.
14
)
) and Home
The power indicator is lit as long as you press
a uDirect 3 button. Green confirms a good
uDirect 3 battery state, red indicates that you
need to charge the uDirect 3 battery.
Two minutes after unplugging the neckloop both
indicator lights will switch off and the uDirect 3
disconnects Bluetooth to save power.
Testing sound via the uDirect 3
1. Wear the uDirect 3 correctly.
2. Press and hold the access ( )
button while switching on the device.
Release the access button. The audio
indicator light with turn pink.
The hearing aids will switch to the streaming
mode and you will hear the uDirect 3 sound
demo.
Use the volume (
volume.
The sound demo will stop after three minutes
or when the access button is pressed.
Adjusting the volume during the sound demo
) buttons to adjust the
15