Pausing Playback; Stopping Playback - Unitron uDirect 3 Guide Rapide

Charging your uDirect 3 on the charging
cradle
1. Ensure the uTV 3 has the correct charging
cradle for the uDirect 3 – see uTV 3 manual
for details.
2. Ensure the uTV 3 is turned on and place
the uDirect 3 into the charging cradle.
3. Allow two hours for a full charge.
Pairing uTV 3 to uDirect 3
1. Switch on the uDirect 3 first. Press the
connect ( ) and volume up ( ) buttons
at the same time for two seconds.
2. Switch on the uTV 3 and then press the pair
button on the back of the uTV 3. The main
indicator light on the uTV 3 will start rapidly
blinking blue. Make sure uTV 3 and the
uDirect 3 are within 1 m (3 ft) range.
3. After successful pairing, the blue audio
indicator on the uDirect 3 and uTV 3 will
stop blinking.
38
Playing back audio from your TV
1. Begin playback on your TV.
2. Adjust the volume level on the uTV 3
to a medium to high level.
3. Make minor volume adjustments with the
uDirect 3 volume buttons (+/–).

Pausing playback

If you want to temporarily stop streaming to
hear a conversation, press the ( ) button to
pause the streaming. Press the ( ) button
again to resume streaming.

Stopping playback

To stop playback on your device and switch
back to regular hearing programs, press and
hold the access ( ) button for two seconds.
Changing hearing aid programs is not possible
while streaming.
Please contact your hearing healthcare
professional if you can not complete the pairing
procedure with the steps described.
39