Resetting Your Udirect 3 - Unitron uDirect 3 Guide Rapide

Selecting from multiple inputs using
the uDirect 3
With only one audio source (e.g., from a
Bluetooth transmitter), each press of the
access ( ) button will pause or resume the
audio source.
Multiple sound sources can be accessed
sequentially by pressing the access ( ) button.
After each press, the uDirect 3 selects the next
connected source in a fixed sequence.
If a source is not connected, the uDirect 3 will
skip over it and proceed to the next source.
Every connected audio source has a fixed place
in the sequence, as shown in the diagram.
Pressing the home (
select the startup programs of your hearing
aids, regardless of the audio source sequence.
52
) button will always

Resetting your uDirect 3

If, for some reason, the uDirect 3 becomes
unresponsive:
1. Slide the uDirect 3 power switch to the
on position.
2. Press and hold the (
button simultaneously for two seconds.
3. Slide the uDirect 3 power switch to the
off position.
4. Wait for five seconds.
The uDirect 3 is now reset and will resume
normal operation when switching on again.
After resetting the Bluetooth pairings, the
configuration status and the grouping to
the hearing aids are kept.
), ( ) and ( )
53