Turning Your Remote Control 2 On And Off; Replacing The Battery - Unitron telecommande 2 Mode D'emploi

Turning your remote control 2 on and off

Your remote control has an On-Off switch located
on the left side of the remote.
To turn the remote control on, slide the switch
•
to the On or unlocked position, revealing a
white dot.
To turn the remote control off, slide the switch
•
to the Off, hiding the white dot. Sliding the
switch to the Off position will avoid sending
unintentional commands to your hearing
aids (while the device is in your handbag or
pocket).
On
4
Off

Replacing the battery

The battery compartment is located on the back
of the remote.
1. Slide the battery cover
in the direction of the
arrow.
2. Grasp the old battery
with your thumb and
index finger and remove.
3. Insert the new battery
into the battery
compartment in the
correct +/– position,
placing the battery's
minus (–) end into the
compartment first.
4. Slide the battery
cover in the opposite
direction of the arrow.
The mini-USB port cannot be used for battery
charging. It is to be used for programming
purposes by your hearing healthcare
professional.
5