Mustang Survival MD6254 Guide D'utilisation page 20

REMOVING OLD INFLATION EQUIPMENT
1. Place your PFD on a flat
surface so that the inflation
equipment is facing up
(through the clear window
with the molded cap) and wipe
off any water
2. Pull apart Velcro™ tabs on the
front flap of the PFD and open
the flap to expose the inflation
equipment
3. Insert your inflator removal
key between the inflator cap's
yellow piece and its black
locking ring – at the spot
that looks like the point of a
triangle (Fig. 14)
4. Turn the key counter clockwise
(if you're right handed, this
is toward you). As you turn,
you are creating a wedge to
open up space between yellow
and black – the black locking
ring will turn left, opposite the
yellow piece (Fig. 15).
5. Once you have enough space
between yellow and black,
put the key aside and grip
the black locking ring directly.
Continue to turn the black
locking ring counter-clockwise
– opposite the yellow piece
(Fig. 16).
6. Once you can no longer turn the black locking ring, you will be
able to pull the entire inflator cap (yellow piece and black locking
ring together) off the PFD (Fig. 17). Discard this used inflator cap.
(Through the clear O-ring, you will now see the used inflator body
– which looks like a black circular disc – attached to your used
gas cylinder.)
20
MUSTANG SURVIVAL/ OWNER'S MANUAL
Locking Ring
Key
FIGURE 14
FIGURE 15
FIGURE 16