Mustang Survival MD6254 Guide D'utilisation page 18

WHILE NOT WEARING
• Place PFD face up on a flat surface free of clutter
• Locate oral tube and remove its cap
• Turn cap over, using pointed end to press into valve. This creates
the outlet for gas/air release (Fig. 11)
• Continuing to press cap end (which keeps your outlet open), use
other hand and forearms to gently flatten the PFD as much as you
can – always moving toward your outlet (Fig. 12).
• To further flatten, let go of the outlet so you can use both hands
to roll the material. You will be creating areas of high pressure and
then releasing that pressure through the outlet:
– Roll material tightly from top of PFD to create a high pressure
area in the bottom.
– Holding your roll in place (usually easiest with your forearm),
open your outlet again (press cap end into valve) to release
pressure.
– Now roll material from the bottom in the same way, creating a
high pressure area in the top end of your PFD. Holding roll in
place, again open your outlet to release remaining pressure.
Oral Inflation Tube
Dust cap
in stowed
position
FIGURE 11
18
MUSTANG SURVIVAL/ OWNER'S MANUAL
Dust cap
in deflation
position
FIGURE 12