• Test the functioning of the unit with
the door open. For this purpose,
enter a valid opening code
(e.g. PIN code, fingerprint,...) several times.
Cleaning instructions secuENTRY easy plus keypad
Dirt can barely adhere to the keypad surface due to the surface finish.
Dusty or dirty surfaces are wiped with a damped cloth. No alcohol-based
detergents (denatured alcohol, SIDOLIN® etc.) or aggressive detergents
(acetone etc.) may be used, as they can damage the surface or the sensor.
secuENTRY easy plus keypad battery change
• Remove the case cover from below by loosening the 2 screws (Tx 8).
• Pull the battery compartment lid downwards until it disengages and
replace the batteries.
When inserting the new batteries, be careful to observe the
correct polarity as indicated on the housing.
secuENTRY easy
English | 51