Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The following combinations are possible:
Distance between forend
screw / fitting (mm) on
the outside
< 43
44 – 53
54 – 60
x: Selection
-: not planned
Tab. 1: Distance between forend screw / fitting [mm] on the outside and the
necessary adaptors.
M2 × 10
Adaptor 1
4 Slide the secuENTRY easy cylinder from inside to outside through the
mortise lock in the door and then tighten the forend screw.
5 Slide the inner knob on the shaft until you have reached the desired
dimension. Please make sure that the distance between rotary knob and
door fitting is at least 1 mm. Then fix the rotary knob using the grub screw.
6 Before fixing the outer knob, please check whether you want to insert the
supplied cover for the profile cylinder cut-out. If so, remove the protective
sheet and fix the cover panel onto the lock section.
46 | English
Adaptor 1
Adaptor 2
–
–
X
–
X
X
2.9 × 16
Adaptor 2
secuENTRY easy
Publicité
Table des Matières
