Burg Wächter secuENTRY easy plus 5652 Mode D'emploi page 28

1 Keypad (SN; MAC; AES; Type)
2 Cylinder (SN; MAC; AES; ADM)
3 Transponder (UID; BW; Type)
If you have purchased a secuENTRY easy plus PASSIVE TRANSPONDER, the
number of the respective transponder is stored in the "Type" field.
Tip: The QR code can also be scanned in electronic form or saved as a photo
on a secured data carrier.
The manufacturer accepts no liability for any injuries or damage that
may occur during installation or improper handling.
Additional functions available using the optional secuENTRY
Software, for example:
• User administration
• Assignment of authorisations
• History function
Optical signalling inner knob
The optical signal in form of an LED is incorporated in the knob on the
outside of the door.
You receive the following information via this LED:
• 1 x short: Cylinder is engaging
• 2 x short: Cylinder is disengaging
• 3 x short: Transponder TAG detected, no opening authorisation
• 4 x short: Permanent opening activated
• 1 x short, 1 × long, 2 sec. pause, repeat: Lock in programming mode
• 5 × short, 2 sec. pause,
repeat at 20 sec.: Battery in the cylinder depleted
Optical signalling outer knob
The optical signal in form of an LED is incorporated in the knob on the
outside of the door.
You receive the following information via this LED:
• 1 x short: Cylinder is engaging
• 2 x short: Cylinder is disengaging
• 3 x short: Transponder TAG detected, no opening authorisation
• 4 x short: Permanent opening activated
• 1 x short, 1 × long, 2 sec. pause,
repeat: Lock in programming mode
• 5 × short, 2 sec. pause, repeat at 20 sec.: Battery in the cylinder depleted
32 | English secuENTRY easy