Replacing Fuse - Yamaha F115 Manuel De L'utilisateur

EMU44922

Replacing fuse

EWM00632
WARNING
Substituting an incorrect fuse or a piece of
wire could allow excessive current flow.
This could cause electric system damage
and a fire hazard.
If a fuse has blown, replace the fuse accord-
ing to the following procedure.
1. Turn the main switch to the "
position.
2. Remove the fuse box cover.
3. When replacing the engine main fuse, re-
move the screws, and then remove the
spare engine main fuse and engine main
fuse.
F115, LF115
3
8
4
7
6
1. Fuse box cover
2. Fuse puller
3. Engine main fuse (50 A)
4. Main switch / PTT switch fuse (20 A)
5. Engine control unit / ignition coil / electric
fuel pump / fuel injector / vapor shut-off
valve fuse (20 A)
6. Starter relay fuse (30 A)
7. Spare fuse (20 A, 30 A)
8. Screw
9. Spare engine main fuse (50 A)
" (off)
1
9 8
2
5
ZMU08112
Trouble Recovery
F130
3 10 9
9
4
8
7 6
1. Fuse box cover
2. Fuse puller
3. Engine main fuse (50 A)
4. Main switch / PTT switch fuse (20 A)
5. Engine control unit / ignition coil / electric
fuel pump / fuel injector / vapor shut-off
valve fuse (20 A)
6. Starter relay fuse (30 A)
7. Electric throttle valve fuse (10 A)
8. Spare fuse (10 A, 20 A, 30 A)
9. Screw
10.Spare engine main fuse (50 A)
4. Install the spare engine main fuse into
the engine main fuse slot, and then tight-
en the screws in their original positions.
5. When replacing a fuse other than the en-
gine main fuse, remove the fuse using
the fuse puller. Install a spare fuse of the
proper amperage.
1
1. Fuse puller
6. Install the fuse box cover.
1
2
5 8
ZMU08216
ZMU04337
101