Advanced Operations; Selection Of Disc; Mounting Of Specimen Mover (Optional); Rotoforce-3 And -4 - Struers RotoPol-21 Mode D'emploi

Selection of Disc

Mounting of
Specimen Mover (Optional)

RotoForce-3 and -4

RotoForce-1
Mounting of
Multidoser (optional)
RotoCom Memory
Unit (optional)
22
RotoPol-21/-22/-25
Instruction Manual

1. Advanced Operations

RotoPol is designed for wet grinding and polishing discs of up to
250 mm dia. However, the whole range of Struers discs can be
mounted.
For automatic preparation of specimen holders mounted in
specimen movers, only aluminium discs should be used. See the
instructions for RotoForce-3 or RotoForce-4.
RotoPol-21/22/25 can be equipped with a RotoForce-3 or
RotoForce-4 specimen mover. To mount the specimen mover, see
the appropriate Instruction Manual.
RotoPol-21 and -25 can be equipped with one RotoForce-1
specimen mover. RotoPol-22, having two independently operating
discs, can be equipped with one or two RotoForce-1 specimen
movers. To mount the specimen mover, see the appropriate
Instruction Manual.
If RotoPol-21/22/25 has to be relocated,
the specimen mover must be removed.
RotoPol-21/22/25, combined with a specimen mover, can be
equipped with Multidoser for automatic dosing of suspensions and
lubricants. To connect Multidoser, see the appropriate Instruction
Manual.
RotoPol-21/22/25, combined with RotoForce-3 or RotoForce-4 and
Multidoser, can be equipped with a RotoCom memory unit. To
connect RotoCom to RotoPol, see the appropriate Instruction
Manual.

IMPORTANT