Configuring The Uce Transmitter - Jay Electronique UC Notice Technique D'installation Et D'utilisation

6.3- Configuring the transmitter
The following parameters are configurable from the transmitter unit :
• Transmit frequency, channel number from 01 to 64 (band 433-434MHz) or 01
to 12 (band 869MHz),
• The "Standby" function duration of 01 to 98 and infinite
• Copy of electronic key identity code in transmitter.
The transmit frequency, the "Standby" duration and the change of identity code
configurations are locked (or not) by the system manager.
By a specific procedure, the above two parameters can be locked or unlocked by
simultaneously pressing pushbuttons n°1, n°2 and n°3 when unlocking the stop
palmswitch button, see § 6.3.1.
Programming
n°3
button
Programming
n°1
button
UC 323882G
n°5
n°3
n°1
See next pages for configuration procedures
n°6
n°4
n°2
DE EN
Programming
n°2
button
Stop palmswitch
button
FR
-83-